-40%

Nikon Coolscan Service

$ 83.95

Availability: 24 in stock
  • Type of Service: Nikon Scanners

    Description

    Performance backed for 12 months
    Service for Nikon LS-5000, LS-4000, LS-2000, LS-50, LS-40, & LS-30 Film Scanners
    This item is posted and managed courtesy of
    Bonanza
    .  For the best price on Nikon film scanners be sure to check
    Bonanza
    .
    If you recently purchased a
    working
    LS-5000, LS-4000, LS-2000, LS-50, LS-40 or LS-30
    scanner, and have found that it performing poorly and needs to be serviced
    ,
    or if you just need advice on installation please contact me.
    Most Nikon Super Coolscan
    LS-5000, LS-4000, LS-2000, and Coolscan LS-50, LS-40, and LS-30
    scanners are 10+ years old.  Although they are built to
    professional standards
    , they can be expected to require maintenance at this age.  The original white Lithium grease lubricant on the scanning stage rails and the drive gears of the two stepper motors dries to the consistency of tar and accumulates dust.  This sticky amalgam often limits, slows, or prevents movement of the scanning stage and focusing mechanism.   Evaporated grease film and dust accumulation on the reflex mirror degrades the image.  But with proper servicing, poorly working scanners can be restored to as-new performance.
    Thanks for reviewing my listing.  I have been selling and servicing Nikon scanners since 2003, and have overhauled hundreds of these great dedicated film scanners.   I clean and remove 100% of the old sticky Lithium grease lubricant and accumulated dust from
    e
    ach scanner I sell or service
    .  I apply
    only
    modern dry lubricants that will
    never
    become sticky and will not collect dust or damage the scanner.  I
    never
    use Silicone, Lithium grease or any petroleum based lubricants which actually decompose and damage the Bakelite bearing surfaces of the scanning stage.
    I clean the mirrors and the lens.  I also replace any mechanical parts showing excessive wear (subject to availability) at little or no cost.
    Servicing these scanners properly
    is a painstaking process and requires nearly full dis-assembly of the scanner.  There are no short-cuts.  I
    guarantee performance
    , and I back my work for 12 months.
    Nikon
    LS-5000, LS-4000, LS-2000, LS-50, LS-40 and LS-30
    scanners are too good to use as paperweights.  These high resolution, professional quality dedicated film scanners are all capable of producing image quality suitable for glossy magazine publication.  With proper servicing, they still outperform by a mile,
    any
    film/slide scanner (new or used) available in the same price range.  Your 35mm negatives and slides are much too valuable not to preserve.   So let's get that scanning project underway!   I'll do my part.  Nikon charged over 0 to service these scanners.
    Important
    .  Your scanner need not be able to pass its power-on self-test.  But your scanner should be recognized by your computer's operating system.  I cannot replace a faulty main circuit board, nor do I attempt electronic component replacement.   I
    f I cannot repair your scanner, I will explain why and return it and your full payment promptly.  I do not charge a "diagnostic" fee, and return shipping is on me.
    Contact me for more information.
    I offer the
    best
    cleaning and lubrication service available for Nikon LS-5000, LS-4000, LS-2000, LS-50, LS-40 and LS-30 Film/Slide scanners regardless of price.
    Full disassembly
    , and
    complete
    removal of the old sticky Lithium grease lubricant and removal of all accumulated dust.
    Application of advanced non-volatile
    dry
    lubricants,
    Full QA testing
    and burn-in,
    Fast turn-around
    , (usually returned in less than 1 week)
    No return shipping fees
    , ever,
    No diagnostic fee
    , even if your scanner is not serviceable,
    Performance is guaranteed.  Up to 12 months free follow-up service
    if required,
    Installation CD
    with easy step-by-step setup instructions for Win10, Win8/8.1, Win7, Vista, and XP (32-bit and 64-bit editions),
    Personalized
    set-up assistance if needed.
    The best
    service available, period!
    Free Return Shipping with Tracking (to US/48 addresses only).  Please contact me for details.
    My turn-around time is usually less than 1 week.
    No international or APO/FPO orders please.
    I
    guarantee
    that when you receive your serviced scanner, it will perform properly
    .  I will provide free follow-up service if required, for up to 12 months to ensure that it does.
    If your scanner fails to perform properly during the 12 months following servicing, I will service it again and restore it to full and proper working order.
    You will pay shipping one way
    .  Return shipping with tracking is always on me.
    A CD with the latest Nikon Scan 4 control software, and Installation Instruction sheets for WinXP through Win10, 32-bit, and 64-bit editions will be included with all serviced scanners.
    Please add my ID to your Favorites list and contact me if your LS-5000, LS-50, LS-4000, LS-40, or LS-30 scanner requires servicing in the future.
    I will provide instructions for shipping and packaging on receipt of your paid order.  You may ship your scanner to me with the carrier of your choice.  Return shipping is on me.
    NOTE:
    A return policy does not apply because this is not a tangible item.  It is a
    service
    .  My work however, and the performance of your scanner are backed for
    12 months
    .
    All inquiries are welcome.
    This item is posted and managed courtesy of Bonanza